Hit enter to search or ESC to close
GET A QUOTE
Fair Dinkum Builds designs and constructs custom garages Adelaide homeowners, rural property owners, businesses, and trades operators can count on for decades of use. With over 35 years of experience and a national network of licenced builders, we engineer every new garage in Australian steel to suit your block, your vehicles, the way you actually plan to use the space, and any changes you might want to make later. From a single garage on a tight Norwood block to a four-bay setup on a Barossa property, our local team handles the entire project from first concept through to final handover.
24a-26 Old Princes Highway Murray Bridge SA, 5255
E murraybridge@fdbuilds.com.au
Visit store page1 Mallyon St Port Pirie SA, 5540
E sales@bentleysbuilding.com.au
Visit store pagetbc Victor Harbor SA, 5211
E victorharbor@fdbuilds.com.au
Visit store pageSouth Australia throws a real mix of conditions at a new shed or garage. You've got coastal exposure along the Gulf St Vincent suburbs, dry heat across the Adelaide Plains, wind off the Adelaide Hills, and the kind of summer sun that punishes anything not built for it. Every garage we build is engineered for the site it's going on, which means proper structural integrity for the wind region, sound corrosion resistance where salt air is a factor, a footprint that respects your block's setbacks, and detailing that holds up over time.
The frames, sheeting, fasteners, and roller doors on your build are matched to your design and your address, so the steel buildings you end up with perform year after year. You also get a 30-year structural warranty on the build, which gives you something solid to fall back on if anything goes wrong down the road. Quality Australian steel from a trusted local business backs every project.
You're working with a team that knows the area. They know which Adelaide councils are quick with approvals and which take a bit longer, and they design garage designs that meet the rules without compromising on what you actually wanted. If you're weighing options before you commit, the Carports vs Garages guide is worth a read to see which build suits your property.
Every garage we build uses BlueScope steel that's tested against conditions Adelaide regularly serves up. That includes salt air along Henley Beach, Glenelg and Brighton, the strong gully winds that hit properties through Stirling and Crafers, the long stretches of 40-plus degree heat across the northern suburbs, and the heavy storm events that roll in off the Gulf. The steel quality directly affects how your shed built today will hold up in 20 years.
We engineer each garage for the specific wind region your property sits in, which shapes the bracing, footing depth, fastener specification, and how the roof and wall sheeting are fixed. Coastal builds need different fastener specifications than inland blocks, and exposed Adelaide Hills ridgelines need heavier bracing than sheltered suburban sites. The shed wind ratings explained guide breaks down how these classifications work and why they shape what gets installed on your build.
Most garages in Adelaide require council approval before construction can start, though smaller builds may fall under exempt development depending on your council and the site. Our team can prepare the engineered plans, structural certifications, site plans, and supporting technical information councils ask for, and we can arrange council approvals on your behalf so you're not chasing paperwork on top of everything else.
Council rules vary depending on where you sit in South Australia, and what's straightforward in one council area can be more involved in another. For a clearer picture of what's required, the SA garage approval guide covers the rules in detail.
We’ll assess your site and advise what might work best for your location.
We’ll find out what you need and design it to suit. We’ll then supply a quote for your consideration.
We’ll create to-spec and compliant plans of your design. We can work together to arrange all relevant building approvals.
It’s important to prepare your site properly for your new build.
We manufacture your build in one of our Australia-wide sites and then transport to your site, ready for construction.
Whether you’re DIY or engaging others, we strongly advise you always use licensed contractors. In some areas our stores can offer full installation.
You should also consider what light, water, electrical and security requirements you’ll need. Depending on your design, other trades may be required.
All that’s left to do is enjoy your new build! Plus you’ve got our 30-year system warranty for peace of mind.
We build garages for customers right across Adelaide, from the eastern and western suburbs through to the Adelaide Hills, northern suburbs, southern coastal suburbs, Onkaparinga region, and out into the Barossa and McLaren Vale. Our team also works with rural and regional property owners across South Australia, including the Fleurieu Peninsula, Yorke Peninsula, Mid North and Riverland.
If your property sits outside the Adelaide metro area and you want to see what's available statewide, the SA service area page covers our full reach across South Australia.
If you're ready to talk specifics, request a personalised quote and one of our Adelaide team will be in touch. We'll work through your site, your requirements, your budget, and your timing, then put together a design and price that matches what you actually need.
Most Adelaide garage projects take between 8 and 16 weeks from quote acceptance to handover, though timing depends on council approval times, site preparation, the complexity of the design, and material lead times. Hills properties with difficult access or sites needing significant earthworks can push that out further. We'll give you a realistic timeline at quoting stage based on your specific project.
Yes. Plenty of Adelaide customers go beyond basic car storage and add a dedicated workshop bay, an office nook, mezzanine flooring for serious storage space, or a personal access door separate from the roller doors. We design these in from the start so the layout, lighting, and insulation suit how you'll actually use the space.
Gable roofs are the most common choice for Adelaide garages because they shed water well and give you the headroom for a stylish look that matches most homes. Skillion roofs work well on contemporary builds or where you want a lower profile. Roof pitch is engineered to suit your wind region and any council overlays, so we'll lock in the right specification at design stage.
Yes. Windows, skylights, gutters, lighting, insulation, personal access doors, and roller doors can all be specified at design stage. We'll talk through how each accessory affects the build, the engineering, the council requirements, and the final shed prices so you know exactly where your budget is going before construction starts.
Often yes, provided the slab meets the engineering requirements for the garage you want. The slab thickness, reinforcement, dimensions, and footing details all need to suit the build, so our team will assess the existing concrete before we sign off. The existing concrete slab guide covers what to check before you go down that path.
All our garages can be finished in the full COLORBOND® steel range, which gives you more than 20 colours designed to suit Australian conditions. You can match your house, pick a complementary tone, blend the garage into the landscape, or go with a feature colour that stands out. We'll walk you through the options at design stage so you can see how the cladding, gutters, trims, and roof colours work together.