Hit enter to search or ESC to close

INSPIRATIONVisit
WHAT'S NEWVisit
SHED DESIGNERVisit
LOCATIONSVisit
ABOUT USVisit
RESOURCESVisit
FRANCHISINGVisit
SERVICE AREASVisit

GET A QUOTE

OUR PRODUCTS

Flat Roof
Garages

Get a Quote

It can often be hard to find something that is both stylish and functional, but with a flat roof garage, you're offered a sleek and practical solution for protecting your vehicle, storing items, or anything else you want to use a garage for.

Our flat roof garages are made with the highest quality materials, too, and designed with durability in mind. So, not only will you get a secure space while enhancing the aesthetic appeal of your property - you'll also get a garage that can truly stand the test of time.


Customisable Flat Roof Garage Design

At Fair Dinkum Builds, we have a team of experts who are dedicated to helping you find the best flat roof garage for your specific needs. Regardless of your available space, intended use, or taste preferences, we'll work with you to create a custom garage that meets your requirements perfectly.

From your profile options to colours and everything in between, we'll make sure you get the garage of your dreams! You can even start designing straight away, using our Shed Designer App.

Stramit® Corrugated roof and wall cladding
  • A cost-effective and reliable roof (or wall) cladding for garages
  • Traditional roofing methods, enhanced by contemporary design and engineering
  • Lightweight, durable and quick to set up.
Stramit Monoclad® roof and wall cladding
  • A balanced design of water-carrying capacity, wind-load performance, and simple fixing.
  • Compatible Stramit Monolap lap joint system allows for single-plane, long-run roofs.
  • Suitable for two-degree roof pitch minimum.
Stramit K-Panel® wall sheeting
  • K-Panel® cladding is wide-covering, and perfect for smaller garages
  • Its lower profile allows for smaller flashing, helpful for tighter budgets
  • Its conventional fastening system makes it quick and simple to install
Stramit Monopanel® wall cladding
  • Monopanel® cladding gives your garage’s exterior clean, fresh lines
  • Available in a wide selection of COLORBOND® steel colour options
  • Not available in Queensland, Northern Territory, or Western Australia.
Stramit® C-Clad 280 wall sheeting
  • Traditional lines and concealed fasteners
  • Easy installation and cleaning
  • Low profile lets you use smaller flashing 
  • Can be installed both horizontally and vertically
Stramit SharpLine® architectural wall cladding
  • Add elegance and class to your garage through the striking look of SharpLine® cladding
  • Let your architectural creativity shine through 
  • Attaches with direct-fix fasteners.

The large range of COLORBOND® steel range of designer colours offers a classic and contemporary palette to enhance the beauty of every build.

COLORBOND® steel
Southerly®

COLORBOND® steel
Bluegum®

COLORBOND® steel
Night Sky®

COLORBOND® steel
Surfmist®

COLORBOND® steel
Shale Grey™

COLORBOND® steel
Evening Haze®

COLORBOND® steel
Dune®

COLORBOND® steel
Woodland Grey®

COLORBOND® steel
Monument®

COLORBOND® steel
Gully™

COLORBOND® steel
Jasper®

COLORBOND® steel
Wallaby®

COLORBOND® steel
Ironstone®

COLORBOND® steel
Deep Ocean®

COLORBOND® steel
Windspray®

COLORBOND® steel
Basalt®

COLORBOND® steel
Pale Eucalypt®

COLORBOND® steel
Cottage Green®

COLORBOND® steel
Manor Red®

COLORBOND® steel
Paperbark®

COLORBOND® steel
Classic Cream™

COLORBOND® steel
Dover White™



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

More weather protection for steel industrial buildings in coastal and industrial environments.

COLORBOND® Ultra steel
Shale Grey™

COLORBOND® Ultra steel
Monument®

COLORBOND® Ultra steel
Woodland Grey®

COLORBOND® Ultra steel
Surfmist®

COLORBOND® Ultra steel
Dune®

COLORBOND® Ultra steel
Wallaby®

COLORBOND® Ultra steel
Windspray®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® Ultra steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® Ultra steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Create a softer, more subtle look with a true Matt finish.

COLORBOND® steel Matt
Bluegum®

COLORBOND® steel Matt
Monument®

COLORBOND® steel Matt
Basalt®

COLORBOND® steel Matt
Surfmist®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel Matt colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel Matt and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Achieve the design edge you’re looking for with the UniCote® LUX world-first, innovative multi-paint method and stand out from the crowd.
UniCote® LUX finishes are only available in Stramit SharpLine® and Monopanel® cladding.

UniCote LUX Stramit Silver Quartz Swatch

UniCote® LUX
Silver Quartz

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Zinc Graphite

UniCote Lux Stramit Pentagon Swatch

UniCote® LUX
Pentagon

UniCote Lux Stramit Spectrum Swatch

UniCote® LUX
Spectrum

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Weathered Iron

Swatch of close up UniCote LUX Ashwood woodgrain texture

UniCote® LUX
Ashwood



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The UniCote® LUX images displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

UniCote® is a registered trademark of Colossal Management Pty Ltd.

Apply MagnaFlow® sheeting to your steel building projects for more durability and extra protection in corrosive environments.

MagnaFlow®
Off White

MagnaFlow®
Birch

MagnaFlow®
Armour Grey

MagnaFlow®
Slate Grey

MagnaFlow®
Monolith



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The MagnaFlow® colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

MagnaFlow® is a registered trademark of Fletcher Building Holdings Limited.

SuperDura™ Stainless steel is design to provide performance in severe coastal and industrial environments.

SuperDura™ Stainless steel
Windspray®

SuperDura™ Stainless steel
Dune®

SuperDura™ Stainless steel
Deep Ocean®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The SuperDura™ Stainless steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

SupaDura™ Stainless steel and ® colour names are trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

We recognise that different customers have different needs for their garages. This is why we tailor every shed or garage we produce for your site, so it fits your unique requirements and dimensions.

Taurean NovaTaur®
  • NovaTaur® rollers are ideal for residential garages with a rounded panel and stylish appeal
  • Its spring-system is tested to work to 25,000 cycles
  • Its quiet and discrete operating system is perfectly suited to a residential area.
Taurean Pr1me roller door
  • A general all-round performer in regards to security, strength and aesthetics
  • The Pr1me shed roller doors have a stylised and refined, rounded appearance
  • An excellent option for residential garages with multiple safety features and a balanced spring system tested to 25,000 cycles.
Taurean Windstrong®
  • Windstrong® roller doors are engineered for optimal wind resistance
  • The Windstrong® roller door’s wide-access makes it ideal for a residential setting
  • These roller doors feature a built-in flexible sealing strip for dirt and debris protection.
InfinitiLine® gutter
  • InfinitiLine gutters provide excellent water-carrying and high performance overflow protection in heavy rain events
  • The InfinitiLine® gutter’s overflow protection slots are concealed, to maintain a smooth continuous line
  • Reduce the risk of water damage to your garage or its contents
  • Available in NSW and ACT only.
Open or closed-in gables
  • The high-pitch of gable roofs provides excellent water dispersion
  • Can be used in combination with eaves and other design options to make your garage stand out
  • Opt for an open or closed gable design – depending on your needs and tastes.
Skylight
  • Let natural sunlight into your garage space with our fibreglass or polycarbonate skylight sheeting
  • Save on heating or lighting costs during the day
  • Our polycarbonate skylights are extra strong and made to endure many years of use.
Other gutters
  • Choose from our wide range of gutters to create a rainwater solution that suits your garage and property
  • Various styles and sizes available to ensure compliance with regional requirements
  • The gutters we offer come in a wide variety of COLORBOND® steel colour options.

Our industry-leading system warranty offers you peace of mind and security. All Fair Dinkum Builds designs are engineered using our unique software solutions and backed by our technical expertise, meaning we'll guarantee they'll withstand wind conditions for 30 years.

That's over and above any materials warranty you get from our suppliers.

Our system warranty is subject to the limitations and qualifications set out in the Warranty Terms and Conditions available here.

All our garages and other quality products are engineered to the highest safety standards and therefore comply with all national, state and territory building code requirements.

Our sheds are also ShedSafe accredited – an industry recognised stamp of approval, so you know that your shed will protect you, your family and your investment.

 

What is the Benefit of Building a Flat Roof Garage?

One of the biggest benefits of building a flat roof garage compared to pitched roofs is their simple construction, which can save both build time and money. A flat roof can also provide more storage space, thanks to its square design.


Why Build Your Flat Roof Garage with Fair Dinkum Builds?

When you build a flat roof garage with Fair Dinkum Builds, you'll benefit from the unparalleled expertise offered by our seasoned professionals, who bring years of experience in building high-quality garages that meet Australian building standards.

We also prioritise your vision and make sure that every step of the process is seamless and hassle-free, leaving you with a custom build that exceeds your expectations and is capable of withstanding everything the Australian climate can throw at it.


FAQs About Building Flat Roof Garages

Do I need a permit to build a flat roof garage in Australia?

Yes, you do need local council approval to build a flat roof garage in Australia. However, requirements vary between states and territories, so make sure you seek guidance from your local council before construction starts.

How much can I expect to pay for a flat roof garage?

This depends on the size, design, materials, and location of your flat roof garage. For example, larger garages with multiple extras will cost more than smaller garages following a simple design. Contact us today to discuss your needs and get a personalised quote.

Where can Fair Dinkum Builds build flat roof garages?

Fair Dinkum Builds has multiple outlets across Australia, and you can find your nearest here.